This is the second last blog about this semesters music production project!
Tomorrow is our last 3 hour session! We’re on schedule with the plan and tomorrow will be main vocal, backing vocal and rainmaker recordings!
I will also be recording some additional instrumentation (bongo and violin) in the ambient Winter Garden after the studio session. I definitely will not have time to record all this tomorrow morning, but I would really like to commit these extra ideas I have to Pro Tools in case I decide I want them during my final mix! I’ll be bringing my Macbook Pro, Roland Cakewalk UA-25 EX audio interface, Rode NTK mic and AKG headphones to the Winter Garden (some name dropping there… hint hint! lol) for these recordings!
Seems like I can never go to college anymore without a ridiculous amount of stuff with me!
It’s only 7.30pm and I’m exhausted! I can barely keep my eyes open but it’s all good, today was a lot of fun! Session 1 of the 3 part music production project was a great success!
As I mentioned in last night’s blog, I aimed to record guide vocal, guitar and cajon in today’s 3 hour recording session. It was a busy morning and not without obstacles but we successfully recorded guide vocal, guide guitar and complete cajon.
The main problem was with the lack of sound in one of the studio monitors. No matter what we tried, no sound would come through and the studio technician said the problem was certainly not a faulty connection or lead but within the desk itself and would take time to fix! So instead of abandoning the session we carried on with one monitor and trusted our DT100’s.
Another slight obstacle but definitely one worth the trouble- the patch connections for the live room were all taken out of the patch bay! Only through setting gain levels did we figure out where exactly to plug in! Trial and error! Well worth it.
So with these minor inconveniences sorted we ploughed on! My plan was to record the cajon in the live room using two AKG-C414’s and AKG-D112 and set up the guide vocal in the control room with a Shure Beta 58 and guide guitar with a Shure Beta 57.
From the above picture one can see an AKG 414 in front of the cajon to capture the snare sound, the D112 at the sound hole in the back for the bass and there is also an AKG 414 to Shane’s left capturing the room sound.
Thanks to pre-production sessions we had already settled on a tempo of 103BPM so I had a shaker track made up to serve as a click track. This actually turned out to be a hindrance and distraction so the song was played live without the click track and the second take was “the one”.
By this stage it was already 11.15am (45 minutes left already!) and we decided we would at least try to record the 12 string acoustic guitar. Initially I set up the microphones in the middle of the room (AKG 414 above the sound hole, Shure Beta 57 at the 12th fret and AKG 414 directly behind the guitar- the guitar tends to lack bass and placing the microphone here added bass).
After quick evaluation of this sound, we agreed the sound wasn’t quite warm enough. How do you get more bass from a non-bassy instrument? I suggested moving the guitar closer to a wall and mic-ing from there- my trust assistant Shauna Kearney did one better and suggested we set up in a corner! She quickly took down the makeshift bass trap of rockwool and triangular foam in a cardboard box, placed two foam panels either side of the corner and a small panel on top of these, making a cosy house for one of the 414’s. Now with the guitar facing out towards the room, the higher frequencies were allowed travel out and the bass frequencies were instantly projected into the corner, like magic, an instant warmth was apparent as well as that shimmering top end I like my Ibanez 12 string for.
Alas time was not on our side and with pressure mounting to get the right take in time before the next students came in for their slotted time, I was unsuccessful in getting a full track. I was not disappointed as we found a good microphone set up for the guitar that we could easily assemble again!
Session 2 is in 2 weeks time, another 3 hour session. Of course I will have to draw up my plans again for this session as I need to make time to record the acoustic guitars as well as double bass.
Session 3 is in 4 weeks time, another 3 hour session and in this session I will record the lead vocal and additional percussion and perhaps a Yamaha upright piano.
So very tired now! But my own music production project is not the only one in my schedule, I will be assisting Shauna Kearney in her production (and playing any instruments she needs to compliment her singer/songwriter Lauren Murphy- I recorded Lauren last Christmas for a similar project!) AND I am playing violin for my classmate, hip-hop producer Scott McLoughlin!
It’s great to be busy in music! My special thanks to the wonderful musicians who made today happen- Keith Caffrey, Shane Taaffe and Shauna Kearney. And thanks to the studio tech! 🙂
After a lovely reading week which turned out to be a brilliant balance of study, work, play AND industry experience (see recent post where I described my day recording location audio on a film set!), I’m all set and raring to start back to college (part 2 of semester 1) in the morning!
I’ve spent the last 6 weeks preparing for my music production project and tomorrow morning we go into the recording studio to start tracking! It’s an early start and I hope to record cajon, a guide vocal and acoustic guitars. I’ve chosen to realise a new Shock Sorrow song called “December”, myself and Keith Caffrey composed during the summer.
I’m very excited to have my classmate and good friend Shane Taaffe play cajon and new friend, bass master Ciarán O’Brien play double bass on this recording! I’ve never recorded both instruments before and I’m very excited! Keith Caffrey will of course be singing lead vocal, playing guitar parts (yes, a solo!) and a secret percussion instrument! 😉 I will of course be playing a small bit of guitar and maybe piano if I’m lucky, my regular studio partner Shauna Kearney will be assisting me (I can’t imagine being in studio without her actually!).
My mind is racing from the sheer excitement of this project and I’m getting ideas all over the place! “Oooh wouldn’t it sound great if I did this!” and “I’d love to slip in a little harmony there!”, it’s so easy to get carried away! The main point of this recording is to capture the sounds as accurately as possible, get the sounds right at the source! “I’ll fix it in the mix” attitude is bye-bye, out the window! There are of course plenty of other criteria to check, good production, instrumentation, record with hardware compression (mmmm Avalon baby) etc!
My primary aim is to record a polished studio version of this song that includes a full band of musicians but with a stripped back approach.
I aim to not only meet the instrumental requirements of this project brief but also extend beyond that by capturing one or two additional instruments and vocals, creating a sonically interesting and more varied recording.
I also aim to create a pleasant and relaxed working environment and enjoy a successful recording process.
I will post a blog tomorrow night about how the session went!
In other news I got to play an Irish harp tonight! I had such fun! Shane Taaffe is one seriously gifted musician, I already knew he is very talented with a guitar, cajon, voice, anything musical he puts his hands to, but I never got to hear him play Irish harp before now. Wow! I could have listened to him all night! Such beautiful music he played. I’m a big Irish trad fan from my fiddle days and lately my influences have been creeping back into my solo material. He played beautiful Turlough O’Carolan tunes, airs, reels and even treated me to “Nothing Else Matters” (Metallica), I pretty much just melted into the floor by then!
So! Expect a future recording featuring Shane Taaffe on the harp! I would dearly love to compose a traditional piece myself and record it. This will happen!
Off to pack my school bag and equipment bag for tomorrow, where’s that list I penned up? 🙂